Example component from the current SonerC product range. Check the linked product record for its configuration.
Ultrasonic Beauty Transducers for Device Manufacturers
These are transducer parts for manufacturers building skin care equipment, not finished handpieces. The catalogue includes 1 MHz units for facial and body heads, a 1.1 MHz two-crystal assembly, and a part specified for 1 and 3 MHz. The metal head has to fit the housing; the ceramic and wiring also have to work with the driver.
Already have a handpiece on the bench? Please send us its head drawing or the old part. We can compare the mounting and electrical readings with the five parts below. A label that says “1 MHz” tells us too little about whether one part can replace another.
Compare frequency and contact geometry
Compare the front face and head dimensions first: the eye-contour head is compact, while the body head uses a larger crystal. The two-crystal and 1/3 MHz designs have different layouts again. For a new ODM head, we need the cavity drawing and driver details alongside the frequency request.
-
![Ultrasonic Skin Tightening Transducer]()
Ultrasonic Skin Tightening TransducerThe QM 650 series operates at 1.1 MHz and is designed for skin-tightening equipment. It uses a dual-crystal design (Φ25mm + Φ15mm) to support different treatment head configurations. The housing...view more -
![Ultrasonic Eye Contour Transducer]()
Ultrasonic Eye Contour TransducerA 25mm ultrasonic transducer engineered for precision treatment of delicate facial zones. With QM 360 and 304 stainless steel construction, this transducer delivers concentrated energy for the...view more -
![1 MHz Ultrasonic Body Transducer]()
1 MHz Ultrasonic Body Transducer1 MHz body transducer component for beauty equipment integration. Current product record lists a 44.88 mm piezoelectric crystal and a 63 × 8.4 mm housing. Send your handpiece drawing and driver...view more -
![1MHz Ultrasonic Facial Transducer]()
1MHz Ultrasonic Facial TransducerSonerC 1 MHz facial transducer component with a 30 mm ceramic. Compare the two listed metal housings against your handpiece drawing and driver.view more -
![1MHz & 3MHz Dual Frequency Ultrasonic Beauty Transducer]()
1MHz & 3MHz Dual Frequency Ultrasonic Beauty Transducer1 MHz / 3 MHz is this component’s sales name. Its actual measured frequencies are 1.2 MHz / 2.4 MHz, as confirmed by SonerC. A handpiece drawing and circuit notes give us the starting information...view more
Choose a beauty transducer by device design
The sizes below come from the linked product records. Some describe a ceramic disc, others a head; neither gives the installed clearance. If you have a housing drawing, compare it with a sample assembly before placing a production order.
| Component | Listed frequency | Published geometry | Selection starting point |
|---|---|---|---|
| Skin-tightening transducer | 1.1 MHz | Dual crystals, Φ25 + Φ15 mm | Two discs: check where each sits in the head. |
| Eye-contour transducer | 1 MHz | 25 mm compact format | Check the nose of the handpiece and its mount. |
| Body transducer | 1 MHz | 44.88 mm crystal diameter | The wider disc needs room in the enclosure. |
| Facial transducer | 1 MHz | 30 mm component; two housing options | Which housing matches your connector? |
| Dual-frequency transducer | 1 MHz / 3 MHz | One component, two specified frequencies | Ask for readings at each drive point. |
A single-component 1/3/10/17 MHz four-frequency configuration is handled as a custom engineering enquiry. There is no published product record for it yet; feasibility and measured performance must be confirmed for the proposed device.
How to specify a component
Mechanical fit
Provide the handpiece drawing, available cavity, contact-face diameter, mounting method, connector and cable route. A crystal diameter is not the complete assembled size.
Electrical matching
A driver schematic helps us compare more than the MHz label. Please include the supply limits and any impedance or capacitance readings you have. For a two-frequency unit, we also need to know how the driver changes modes.
Sample checks
On the sample, measure resonance and impedance, then check the temperature rise during the proposed duty cycle. The drawing should record the dimensions that matter at assembly. Agree on pass limits for these checks before the production run.
OEM and ODM engineering support
SonerC works on the ceramic and metal assembly for beauty equipment makers. A change to the head diameter can also affect the shell, cable exit and driver match, so send the drawing as a set. If your machine tracks frequency while running, include that circuit description. The tracking happens in the machine; the catalogue parts do not all have that function.
For a replacement, an old unit and its electrical readings give us a useful reference. A new head begins with a drawing and sample checks. We quote the agreed build once its dimensions and test limits are settled. The production process and ceramics range show related work at SonerC.
Buyer questions
Is a 1 MHz beauty transducer the same as a HIFU transducer?
No. “1 MHz” appears on many unrelated heads. It says nothing by itself about focus, acoustic output or allowable duty cycle. None of the catalogue parts shown here is specified as a HIFU head. A HIFU project would need its own drawing, acoustic data and device safety review.
Can an existing 1 MHz ultrasonic transducer be replaced by one of these parts?
Possibly, but first compare the complete head, plug and available electrical readings. A photo of the old part beside a ruler and its part number are useful. We cannot call it a drop-in replacement from the MHz marking alone.
What does an ultrasonic transducer ODM enquiry need?
Send the head drawing, the space inside the handpiece and a description of the driver. Tell us whether you need 1 MHz, 3 MHz or another frequency, and show the plug and cable route. Add the intended order quantity and any sample checks your team already uses. We can compare those notes with a catalogue unit or discuss a new assembly.
Does this category include complete ultrasonic beauty devices?
The five listings are components. They do not include the electronics or housing of a finished skin care device. If you are sourcing a complete machine, tell us that in the enquiry so we can discuss the appropriate supply scope.
Shenzhen Soner Technology Co., Ltd. is one of the most professional ultrasonic beauty transducer manufacturers and suppliers in China, specialized in providing high quality customized service. Please feel free to wholesale ultrasonic beauty transducer for sale here from our factory.
ultrasonic transducer for ultrasonic detection of defects, ultrasonic transducer for security systems, ultrasonic transducer for textile industry
