Shenzhen Soner Technology Co., Ltd. is one of the leading manufacturers and suppliers of 175l heavy-duty ultrasonic cleaning system in China. With abundant experience, we warmly welcome you to wholesale high quality products for sale here from our factory. We also accept customized orders.
Products Description
Diesel engine rebuild shops, industrial maintenance departments, and heavy equipment service centers routinely handle components-V8 cylinder heads, industrial mold blocks, and gearbox assemblies-that exceed the capacity of standard 100L ultrasonic tanks. The Soner SE-175L 175 L heavy component ultrasonic cleaner addresses this with a 700 x 500 x 500 mm tank engineered for large mechanical components.
With 2400 watts of ultrasonic power and a 6000 W heater reaching 80 degrees Celsius, the SE-175L sustains cleaning effectiveness on high thermal-mass parts. When operators load a 60 kg V8 cylinder head into the tank, the heating system recovers the target temperature in minutes, and the transducer array maintains cavitation density across the full chamber-a performance requirement that smaller heating systems cannot meet.
The tank accommodates V8 and large diesel cylinder heads, industrial mold blocks up to 680 mm, large pump housings, and complete gearbox assemblies. Three-phase 380V power input supports continuous production-grade duty cycles with safety interlocks for over-temperature, over-current, and low-water conditions.
Soner's in-house transducer manufacturing - from piezoelectric ceramic production through final bonding - enables acoustic optimization between the transducer array and tank geometry. For heavy components where cavitation must penetrate thick contamination layers, this engineering control over the transducer-to-tank interface directly affects cleaning effectiveness.
The SE-175L anchors the heavy-duty tier of Soner's Industrial Ultrasonic Cleaner lineup, bridging standard batch cleaning and large-capacity production systems. See the complete range from 40L to 1500L.
Products Specification
|
Parameter |
Specification |
Notes |
|
Tank Capacity |
175L |
Industrial-grade cleaning volume |
|
Inner Dimensions |
700x500x500mm |
Fits target component sizes for this category |
|
Ultrasonic Frequency |
28/40kHz |
Dual-frequency: 28kHz heavy degreasing / 40kHz precision cleaning |
|
Ultrasonic Power |
2400W |
Adjustable 0-100% via digital panel |
|
Heating Power |
6000W |
Rapid heat-up, stable temperature control |
|
Temperature Range |
Room Temp - 80C (176F) |
Digital control with LCD display |
|
Timer Range |
0 - 24 Hours |
Precise digital setting with auto-shutoff |
|
Tank Material |
SUS304 Stainless Steel |
Chemical resistant, industrial durability |
|
Control Panel |
Digital LCD Touch |
Real-time temperature, power, and time display |
|
Power Supply |
220V/50Hz or 380V/50Hz (3-phase) |
Factory pre-configured to region and power class |
|
Transducer Type |
Bonded Piezoelectric |
In-house manufactured by Soner |
|
Generator Type |
Digital Sweep Frequency |
Prevents standing waves, uniform cavitation |
|
Safety Systems |
Over-temp / Over-current / Low-water |
Automatic protection, unattended safe operation |
Product Advantage
2400W High-Output Ultrasonic Power
Sustains cavitation density across the full 700 x 500 x 500 mm chamber. Maintains cleaning effectiveness on high thermal-mass components where smaller units lose power under load.
6000W Rapid-Recovery Heating
Recovers temperature in 5-8 minutes after loading heavy components. Keeps production cycles on schedule where smaller heating systems take 20-30 minutes to recover.
700 x 500 x 500 mm Heavy Component Tank
Fits V8 cylinder heads, industrial mold blocks, large pump housings, and gearbox assemblies. Eliminates the need for two separate machines when handling both medium and large components.
Three-Phase 380V Industrial Power
Supports continuous production-grade duty cycles. Essential for the 8400W total power draw that single-phase circuits cannot reliably sustain.
Industrial Safety Interlocks
A triple protection system enables unattended overnight operation. Over-temperature, over-current, and low-water automatic shutoff for production safety.
Mold and Die Cleaning Configuration
The SE-175L is configured as an industrial mold cleaning system with 2400W power and 6000W heating that breaks down polymer residues on large mold surfaces. The 700 x 500 x 500 mm tank fits injection mold blocks and stamping dies up to 680 mm.
Product Application
V8 & Large Diesel Engine Rebuilding [PRIMARY]
The SE-175L functions as a V8 cylinder head cleaning tank for V8 cylinder heads, large diesel engine components, and engine blocks. The 700 x 500 x 500 mm tank accommodates components that 100 L units cannot fit-including V8 heads up to 680 mm and complete diesel engine assemblies.
Industrial Mold & Die Cleaning
Remove plastic residue, release agents, and contamination from large injection mold blocks and stamping dies. 2400W ultrasonic power breaks down polymer residues on large mold surfaces. The 500 mm tank depth accommodates mold blocks that smaller tanks cannot submerge.
Heavy Machinery Component Service
Clean gearbox housings, hydraulic manifolds, large pump casings, and mechanical assemblies. 6000W heating sustains cleaning temperature on high thermal-mass components. Three-phase power supports continuous-duty operation for production maintenance schedules.
OEM & ODM Service
• V8 cylinder head depth customization-Increase tank depth or modify internal dimensions to accommodate V8 and large diesel cylinder head profiles that require full submersion.
• Heavy-duty transducer reinforcement and high-thermal-mass heating configuration - engineer transducer bonding, power distribution, and rapid-recovery heating for continuous-duty cleaning of large mechanical components.
• Three-phase power configuration and regional voltage adaptation-pre-configured electrical systems for North American, European, and Southeast Asian industrial installations.
• For complete OEM/ODM terms, including certification support, MOQ flexibility, and technical documentation, see our dedicated OEM/ODM Services page.
FAQ
Q: What components fit in the SE-175L tank?
A: The SE-175L tank measures 700 x 500 x 500 mm and accommodates V8 cylinder heads, large diesel engine components, industrial mold blocks, gearbox assemblies, and large pump housings. For inline-4 heads and smaller components, the SE-100L is more appropriate. For larger assemblies, see the SE-360L or large-capacity models.
Q: Why does the SE-175L require three-phase power?
A: Because the total power is 8400W (which is 2400W ultrasonic cleaning power and 6000W heating), in order to fulfill the safety requirement, we use a three-phase 380V distribution of the current across three conductors. It can reduce wire gauge requirements and enable continuous production-duty operation without overheating wiring or tripping breakers.
Q: How does the 6000W heating system perform under load?
A: Due to its powerful heating, it makes the cleaner reach the target temperature in 5-8 mins compared to the lower heating power. It is so apparent if you are dropping 50-60 kgs into the tank.
Q: Can the SE-175L handle continuous heavy machinery cleaning?
A: Yes. The SE-175L functions as a heavy machinery degreasing bath rated for continuous-duty operation with reinforced transducer bonding, a thermal-protected generator, and 2.5 mm SUS304 tank construction. The 6000W heating system recovers temperature rapidly after loading heavy components, keeping production cycles on schedule.
Q: How does the SE-175L compare to the SE-100L?
A: Compared to SE-100L, 175L is 77% more tank volume; further, it has 60% more ultrasonic power, which is 2400W. Most importantly, 175L is longer, and it is fit for V8 cylinder heads and large components that the 550mm SE-100L tank can't fit.
Q: Can ultrasonic cleaning cause surface pitting on cast iron cylinder heads?
A: No, when proper frequency and solution chemistry are used. Ultrasonic cavitation removes contamination through microscopic bubble implosion - it does not mechanically abrade or pit the base metal. Surface pitting observed after cleaning is typically pre-existing corrosion that was masked by carbon deposits and becomes visible only after cleaning. To protect cast iron surfaces during ultrasonic cleaning: use an alkaline degreaser with corrosion inhibitors, maintain solution temperature between 60-70C, and avoid prolonged cycles beyond 90 minutes. The SE-175L's 28/40kHz dual-frequency capability allows operators to select the appropriate cavitation intensity for the component material and condition.
Q: What is the recommended cleaning cycle for V8 cylinder heads and heavy components?
A: Recommended starting points for heavy components: V8 cylinder heads (cast iron, heavy carbon) - 45-60 minutes at 70-80C, 80-100% power, 28kHz with alkaline degreaser at 10% dilution. V8 aluminum heads with valve seats - 30-40 minutes at 60-65C, 40-50% power, 40kHz with non-caustic cleaner. Industrial mold blocks (polymer residue) - 40-60 minutes at 70-80C, 80-90% power, 28kHz. Large pump housings - 30-45 minutes at 65-75C, 70-80% power, 28kHz. Gearbox assemblies - 45-60 minutes at 65-75C, 60-70% power, 28kHz. Always inspect component condition after first cycle and adjust parameters accordingly. For aluminum components, verify valve seat retention and surface condition before committing to full production cycles.
Q: What cleaning cycle is recommended for V8 cylinder heads?
A: For V8 cylinder heads with carbon and grease: alkaline degreaser at 10% dilution, 70-80C, 45-60 minutes, 80-100% power at 28kHz. For aluminum heads with installed valve seats: non-caustic cleaner, 60-65C, 30-40 minutes, 40-50% power at 40kHz. Always inspect valve seat retention after the first cleaning cycle.
Hot Tags: 175l heavy-duty ultrasonic cleaning system, China 175l heavy-duty ultrasonic cleaning system manufacturers, suppliers, factory
