Products Description
It is a specialized cleaning device that uses high-frequency sound waves to create microscopic cavitation bubbles in a liquid solution. These bubbles effectively remove dirt, grease, and grime from intricate and hard-to-reach areas of bike components without causing damage.
Products Advantage
Benefits of Using the device
✔ Deep Cleaning – Removes dirt, grease, and grime from hard-to-reach areas (e.g., chain rollers, derailleur pivots).
✔ No Scrubbing Required – Saves time and effort compared to manual scrubbing with brushes.
✔ Safe for Delicate Parts – No risk of scratching or damaging components.
✔ Eco-Friendly – Uses water-based solutions rather than harsh solvents.
✔ Extends Component Life – Regular deep cleaning reduces wear and enhances performance.
Application of the product
How is it Work for Bike Parts
Fill the Tank – The cleaner is filled with a water-based cleaning solution designed to break down grease and dirt.
Submerge Bike Parts – Components such as chains, derailleurs, cassettes, bearings, and other small parts are placed into the tank.
Activate Ultrasonic Waves – The machine generates ultrasonic waves (typically between 20–40 kHz), creating microscopic bubbles that implode, removing contaminants from the surfaces.
Thorough Cleaning – The ultrasonic process reaches into tiny crevices, ensuring deep cleaning without scrubbing or disassembly of complex parts.
Rinse & Dry – Once cleaned, the parts are rinsed with clean water and dried before reassembly.
Best Practices for the device
Use a water-based degreaser – Avoid harsh chemicals that may damage parts.
Pre-rinse heavily soiled parts – Remove large debris before ultrasonic cleaning.
Avoid cleaning sealed bearings – Ultrasonic waves can strip lubricants from inside.
Rinse and dry parts thoroughly – Prevent rust and corrosion after cleaning.
Re-lubricate moving parts – Chains, bearings, and derailleurs need fresh lubrication after cleaning.
Product Paramete
|
Model |
Ultrasonic Power / Heating Power |
Frequency |
Capacity |
Cleaning tank size |
Product size |
|
SE-2000B |
60W/120W |
40kHz |
2L |
150 X 130 X 100mm |
75x 162 x 220mm |
|
SE-3200B |
120W/150W |
40kHz |
3.2L |
240 x 135 x 100mm |
270 x 170 x 220mm |
|
SE-4500B |
120W/260W |
40kHz |
4.5L |
300 x 150 x 100mm |
325 x 175 x 220mm |
|
SE-6000B |
120W/260W |
40kHz |
6.0L |
300 x 150 x 150mm |
325 x 175 x 270mm |
|
SE-10LB |
240W/260W |
40kHz |
10L |
300 x 240 x 150mm |
325 x 265 x 270mm |
|
SE-15LB |
360W/400W |
40kHz |
15L |
330 x 300 x 150mm |
355 x 325 x 270mm |
|
SE-22LB |
480W/600W |
40kHz |
22L |
500 x 300 x 150mm |
530 x 325 x 270mm |
|
SE-30LB |
600W/600W |
40kHz |
30L |
500 x 300 x 200mm |
525 x 325 x 330mm |
FAQ
Q: What kind of parts can be clean by the device?
A: Chains – Removes grease and embedded dirt between the rollers.
Cassettes & Sprockets – Cleans between gears where brushes struggle to reach.
Derailleurs – Removes grime from pulley wheels and pivot points.
Bearings – Cleans out old grease before re-lubrication.
Brake Calipers & Rotors – Removes dirt, brake dust, and contaminants.
Bolts & Small Parts – Ensures all small hardware is free from corrosion and grease buildup.
Q: How to choose a suitable cleaning device?
A: Tank Size: A 2–3L cleaner is sufficient for small parts, while 6L or larger is better for chains and cassettes.
Frequency: 40 kHz is ideal for general bike parts; 25-30 kHz works better for heavily soiled components.
Heating Function: A heated ultrasonic cleaner (~50°C) improves degreasing efficiency.
Timer Settings: Adjustable cycles (5–20 min) allow for customizable cleaning.
Hot Tags: ultrasonic cleaner for bike parts, China ultrasonic cleaner for bike parts manufacturers, suppliers, factory, ,
